Fully adjustable from stock to 6 lift Apoc rear adjustable control arms are a significant upgrade from stock; factory controls arms work great with factory-sized tires and suspension. Apoc Ram control arms are built to allow proper rear pinion and driveshaft angles to ensure your u-joints are happy, and control wheel hop under load. When adding any lift to a Ram, you change your driveline angles, which can create premature U-Joint failure and driveline vibrations; adjustable rear control arms will help reduce or eliminate these issues. Adjustable Controls arms are fully adjustable from stock to 6 of lift, so if you’re just starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time. Parts Included: 2 Upper Control Arms 2 Lower Control Arms Top Quality Polyurethane Bushings. 250 Wall Tubing Bushing Ends DOM Tubing Uses Factory Hardware Grease Fitting For Each Bushing For Long Life Install Time:? 3-4 Hours Basic hand tools Jack and Jack stands Install Instructions Control Arm lengths If you are upgrading from factory control arms, make sure you set the length to the correct lift size to keep your steering geometry accurate. The larger the lift, the longer the control arms. The Instructions will give you the measurements to set each control arm to match your lift; an alignment is recommended after installation to ensure all alignment angles are proper. Fully adjustable from stock to 6 lift. Apoc rear adjustable control arms are a significant upgrade from stock; factory controls arms work great with factory-sized tires and suspension. 2 Upper Control Arms. 2 Lower Control Arms. Top Quality Polyurethane Bushings. Bushing Ends DOM Tubing. Grease Fitting For Each Bushing For Long Life. Jack and Jack stands. If you are upgrading from factory control arms, make sure you set the length to the correct lift size to keep your steering geometry accurate. Sorry, our items are NOT available for pick-up. No additional information at this time. You might also like.